Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 58

OPERATING DISPLAY
PULSE
NAVIGATION IN PULSE MODE
PRIME
Runs pump at 100% speed
while button is pressed
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
Run Pump?
Yes
yes/no
Pulse
OFF
If unlocked or password not set.
While the pump
receives a pulse, the
display will show a
closed contact
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
Pulse
950
select
Sec
Pulse
100
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
BACK
Cycles the display through
the units of output
Sec
Enter password if display is locked.
To Main Menu if unlocked.
Hold for 2 seconds
Pulse
%
Prime
Pulse
Pulse
Pulse
Pulse
Pulse
58
ENTER
Press and hold for 2 seconds
to go to the Main Menu
Process Gal
999,999.9
%
50
RPM
22
Metric is displayed
GPD
if selected in
20.0
Configuration
GPH
0.83
oz/min
1.77