4. INSTALLATION
4.1 Safety warnings:
Attention
Before starting the installation, the physical integrity of the product should
be checked, and if there is any failure, the product should be replaced.
The installation must follow the standards of the technical regulations in
effect.
Alert
All bolts used during installation must be tightened to the correct tightening
Atenção
Alert
torques indicated in this manual. the tightening torques indicated in this
manual.
Caution
During installation and maintenance, all circuits connected to the product
must be de-energized, must be de-energized.
Caution
4.2 Tools and instruments required for installation:
1.
Torque wrench bit screwdriver 2.5 mm;
2.
Phillips #2 torque wrench bit;
3.
Paint stripper;
4.
Screwdriver 2.5 mm;
5.
Screwdriver 3.5 mm;
Alert
Use the tools and instruments indicated in this manual to avoid damage to
Atenção
Alert
the product and to obtain better installation results.
The measuring instruments must be compatible with the system.
CLAMPER Indústria e Comércio S.A.
www.clamper.com.br
|
6.
Torque wrench;
7.
Phillips #2 wrench;
8.
Multimeter;
9.
Cutting pliers.
16103133
+55 31 3689 9500
Page 32 of 44