Publicidad
Idiomas disponibles
Idiomas disponibles
Function
A Height of the seat
Lowering the seat:
Sit down on the seat
Pull the
P
1.
2.
button upwards (the seat will drop slowly)
Releasing
3.
the button at the desired height will lock the position
Raising the seat:
Stand up
Pull the button up-
P
1.
2.
wards (the seat will rise slowly)
Releasing the button
3.
at the desired height will lock the position
E
C
D
B
B Angle of the backrest
Locking the backrest: Turn handle forwards
P
= backrest is locked (backrest tilt 0°, 8°, 16°, 26°)
Releasing the lock: Turn handle back completely
P
= backrest is dynamically adjusted
F
C
E
A
C Height of the lumbar support /
comfort lumbar adjustment (optional)
Adjust the height:
Do not lean against the backrest
P
1.
Move lumbar support with both hands
2.
D Depth of the seat
Adjust the seat depth:
Pull and hold button
P
1.
Push the cushion to the desired position
Release
2.
3.
the finger plate, and the seat will engage
E Adjusting the armrests
Adjust the height of the armrests:
Press and hold
P
1.
the button
Raise or lower the armrest to the desired
2.
height
Release the button to lock the armrest
3.
Adjust the depth of the armrests (Multifunction arm-
P
rests): slide the armrest cover backwards or forwards;
it will lock in place automatically
Swivel contact surfaces in any position (Multifunction
P
armrests): up to 40° inwards, up to 20° outwards
Adjust the surfaces to any position (4D armrests):
P
Press and hold the lever on the inside
The surface
1.
2.
can be moved forward and backward as well as rotated
to the right and left by 360
Release the lever,
3.
surface locks into the selected position
F Adjustment of the headrest (optional)
Push the headrest to the desired height
P
(it is continuously adjustable)
Adjust the tilt of the headrest as desired
P
User notes
Correct use
This swivel chair may only be used for the purpose
intended while exercising due care and attention. Using
it inappropriately (e.g. as a stepladder, sitting on the
armrests or placing extreme weight on one side) could
result in accidents.
Castors
Before using the product for the first time, please
remove the coloured transport protection.
A variety of castors are available, for the sake of
your safety and for use on different types of flooring
in accordance with safety regulations:
– hard castors for soft flooring,
– soft castors for hard flooring.
Changing castors: this might be necessary, for instance,
after moving office, or after the installation of a new
floor surface – simply pull out the castors and push new
ones in.
To protect the floor covering and increase the service
life of the castors and glides, it is recommended or
necessary to regularly check, clean and, if required,
replace them. Should you have any questions, please
do not hesitate to contact our Customer Service.
Plastic parts
Soapy water is suitable for cleaning. Please do not use
any aggressive cleaning materials.
Upholstery/membrane
Clean textiles on a regular basis. Minor stains can be
vacuumed or removed using compressed air or luke-
warm water and a damp cloth. Only use mild detergent
or the cleaning foam offered by Sedus.
Leather
Leather is a natural product. Colour shading gives the
material its unmistakable touch. Rub off light soiling with
a soft woollen cloth. Heavier soiling should only be tre-
ated with cleaners designed for aniline dyed leather. Do
not expose semi-aniline leather to direct sunshine.
Seat height adjustment
We recommend cleaning the piston rod regularly with
a cloth. Other work on the gas spring, e.g. replacement,
may only be carried out by trained staff.
Publicidad
