Publicidad
Idiomas disponibles
Idiomas disponibles
Technical specifications
Multifunction welding unit
Welding unit model
Designation ISO 12176-2
Weight
Dimensions
Maximum absorbed power
Working range
Power supply
Working temperature
Power cable
Welding cables
Screen
IP protection
Duty cycle 60%
Output Voltage
Compensation factor Set
Working conditions
Power source
The multifunction welding unit power source shall be provided exclusively as follows
(according to the different models):
230V quality alternating current 50÷60Hz (maximum tolerance ± 20%);
115 V quality alternating current 50÷60Hz (maximum tolerance ± 20%).
We therefore recommend to ensure that the power source that you intend to use responds
to the required characteristics. If the power source of the multifunction welding is a tension
generator, make sure that it is of the asynchronous type. Before purchasing a generator,
please contact our Technical Department to obtain more information on its required
characteristics.
If extension cables have to be used, it is necessary to pay special attention to the cable
cross section to length ratio in order to prevent affecting the multifunction welding unit
good functioning. In particular, as regards the extension cable cross sections, the following
chart applies:
Cable Section
2.5 mm
4.0 mm
6.0 mm
WARNING: we suggest to always use fully unwound extension cables.
00E9001HW
P
4US1VAKDX
2
230V/115V - 26 kg (57.2 lb)
310 x500 x h205mm (12" x 19" x 8")
5000 VA
Fittings from ø20 to ø800mm
(ø1/2"÷ø32")
90 Amp
Recommended length
2
(13 AWG)
6 - 7 m (19.69 – 22.97 ft)
2
(11 AWG)
9 - 11 m (29.53 – 36.09 ft)
2
(9 AWG)
15 - 17 m (49.21 – 55.77 ft)
22
19SSEL8404
00E9001
P
4US1VAKDX
2
230V/115V - 25,2 kg (55.56 lb)
310 x500 x h205mm (12" x 19" x 8")
4000 VA
Fittings from ø20 to ø630mm
(ø1/2"÷ø24")
230V - 50÷60Hz o 115V 50÷60Hz
From -18 °C to + 52 °C (da 0 °F a 125 °F)
Length 4 m (10 ft)
Length 4 m (10 ft)
Backlit LCD, 4 lines, 20 columns
54
73 Amp
5 ÷ 42 V
Sì
19SSEL8404L
00E9001L
P
2US1VAKDX
2
230V/115V - 13 kg (29 lb)
310 x 450 x h170 mm (12" x 18" x 6" )
1500 VA
Fittings from ø20 to ø160mm
(ø1/2"÷ø6")
27 Amp
Publicidad
