Publicidad
Idiomas disponibles
Idiomas disponibles
ERROR
ERROR TYPE
CODE
101
RAM MEMORY
WELDING CABLE
102
BREAK
INTERNAL
103
TEMPERATURE
PROBE
MANUAL STOP BY
200
OPERATOR
201
LOW PRESSURE
202
MEMORY EMPTY
ERROR DESCRIPTION
RAM memory data and date/time not valid.
Welding cable is damaged.
Internal Temperature Probe failure.
The
operator
manually
pressure test by pressing ESC.
The
testing
pressure is
minimum pre-set value.
No data in this pressure memory.
34
RECOMMENDED ACTION
persists
Assistance.
The internal battery could be flat.
Enter date/time once again and if the
problem persists contact our Technical
Assistance.
Do not weld and replace the damaged
part.
Contact our Technical Assistance.
aborted
the
The test can be restarted by following
the instructions on page 14.
below
the
Locate and fix the leak, then repeat the
testing procedure from the start.
No action.
contact
our
Technical
Publicidad
