hillvert HT-WB-900 Manual De Instrucciones página 43

Align the holes in the rails and the cutting bar, and then secure them with M10x45 and M10x30 bolts and
nuts:
3.3. Mounting a strip mower/tiller(optional equipment) to the
single-axle tractor
3.3.1. Quick coupler
The single-axle tractor is equipped with a quick coupler that allows quick replacement of the machine's
attachments. Before installing the tool, install the quick coupler as shown and make sure the power take-off
(PTO) lever is in the idle position. Connecting the tool, with the engine switched off and the machine set
horizontally, pull the pin upward, hook the tool in the connecting sleeve, and set the pin in the original