Descargar Imprimir esta página

Trotec IRD 1200 Manual De Instrucciones página 138

Ocultar thumbs Ver también para IRD 1200:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Operation
Info
The device will only emit heat if the settings are made
via the remote control.
Display
21
No. Designation
Meaning
19 Operating light
Flashes red when the device has been
switched on via the on/off switch.
Is permanently illuminated in red when
the device has been switched on via the
remote control.
20 Timer LED
Is permanently illuminated in green
when the timer is active.
21 Segment display Heating level indication:
P0 = device in standby mode
P1 = level 1
P2 = level 2
P3 = level 3
Indication of the number of hours during
timer programming
Info
An acoustic signal is emitted each time a setting is
activated.
Info
If you switch off the device via the remote control, the
device will be set to standby mode. If standby
operation is not required, you can switch the device off
via the on/off switch (2).
EN
Remote control
The device settings can only be made using the remote control
included in the scope of delivery.
Therefore, keep the remote control in a safe place, otherwise
the device can no longer be operated. Should you still be unable
to find the remote control, you can reorder a new one from
Trotec.
19
20
No. Designation
22 Transmitter
23 Power button
24 P2 button
25 TIMER button
26 P3 button
27 P1 button
The heating capacity in the individual heating levels is 33 %
(level 1), 66 % (level 2) and 100 % (level 3):
Heating
capacity
P1 = level 1
P2 = level 2
P3 = level 3
infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200
27
P1
P2
26
P3
TIMER
Meaning
Sends signals to the device.
Switching the device on and off
Selecting heating capacity level 2
Timer function
Automatic switch-off in increments of
1 hour up to 24 hours
Selecting heating capacity level 3
Selecting heating capacity level 1
IRD 1200 IRD 1800 IRD 2400 IRD 3200
400 W
600 W
800 W
1200 W
1200 W
1800 W
Info
If you switch off the device via the remote control, the
device will be set to standby mode. If standby
operation is not required, you can switch the device off
via the on/off switch (2).
22
23
24
25
800 W
1070 W
1600 W
2140 W
2400 W
3200 W
11

Publicidad

loading

Este manual también es adecuado para:

Ird 1800Ird 2400Ird 3200