Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
1. Remove the product from the box and place it under the sink and attach the water
purification tap.
2. Remove the T-ball valve and install it in the water supply pipe.
3. Connect the machine and piping according to the icons on the connections of
the machine.
4. Connect the power supply and switch on the machine.
5. The machine automatically enters the water production status and black water
may come out when the machine is used for the first time.
6. After continuous purification of the water for 10 minutes, it is ready to be used.
7. Concentrated water can be drained directly into the drain, the sink or collected in
a container.
The installation of the machine is shown below.
1
2
1
Ball valve
2
Water inlet
3
Drain
23
4
3
4
Pure water
5
Plug
5
EN
Publicidad
