Publicidad
Idiomas disponibles
Idiomas disponibles
NOTICES
1. The product must be installed by the local service network professional after
purchase. Professional installers will wash the filter element during installation.
2. Do not install the machine yourself, otherwise the company will not be re-
sponsible for any quality problems or accidents caused.
3. After installation, the machine can be used after producing water continuously
for 10 minutes.
4. If the osmosis unit is not used for more than a week, when using it again, drain
the water for 3-5 minutes before consuming the water.
Filter functions and use
1. The method of fixing the front casing and
the intermediate casing of the water purifier
is a Snap-On combination, which can be
opened by pulling the slot on the right side
of the front casing.
2. Lift the pressure plate on top of the filter
element to be replaced. The element is
pushed out and pulled out horizontally.
3. Select the appropriate replacement filter
element. Align the upper filter connector
with the corresponding connecting rod
in the socket, insert it horizontally, press
down on the filter pressure plate, then you
should hear a "click" indicating that it is
locked in place.
Please make sure that the filter is installed
in place and the pressure plate is fastened.
If the filter card is not properly fastened,
the machine will leak water.
4. Turn on the purified water tap and let it run
for about 15 minutes. After the water is clear,
you can consume the water normally.
1
2
24
EN
Publicidad
