Publicidad
Idiomas disponibles
Idiomas disponibles
DISPLAY PANEL
1
PAC Filter Indicator
2
RO Filter Indicator
3
TDS indicator
4
Water production indicator
5
Filter reset button
In the standby state, if it is detected that the
high pressure switch is on permanently, the
machine enters the water production mode
and the water production indicator will turn
blue at 1 Hz.
In the water production state, if it detects that
the high pressure switch is off continuously
for 0.25 seconds, the machine enters standby
mode and the water production indicator will
normally be lit blue.
WATER PRODUCTION STATE
Booster pump and inlet water solenoid
valves are open, the discharge solenoid
valve is closed.
In the water production state, if the high
pressure switch is detected to be off con-
tinuously for 0.25, the machine enters
standby mode. (Standby mode: Booster
pump, flushing solenoid valve and water
inlet solenoid valve are closed).
PROTECTION AGAINST WATER SCARCITY
After continuous water production (or
continuous pump running time including
flushing + water production) for 1 hour, the
machine enters smart inspection mode
and stops producing water, it will return to
normal after switching on again:
In the water shortage protection state, all
indicators flash red at 1 Hz; the buzzer stops
sounding after 10 alarms.
25
1
2
3
5
4
EN
Publicidad
