Skil CR5435B-00 Manual Del Propietário página 16

Line Guide (Fig . 6)
For a 0° cut, use the notch on the left in the
foot for guidance. For 45° bevel cuts, use the
notch on the right. The cutting guide notch
will indicate an approximate line of cut. Make
sample cuts in scrap lumber to verify the actual
line of cut. This will be helpful because of the
variety of different blade types and thicknesses
available.
Dust Exhaust Port (Fig . 7)
The dust exhaust port requires the supplied
vacuum adapter for connection to vacuum
cleaner/dust extractor hoses with Ø1-1/4''
(32mm).
Keep the saw connected to a vacuum cleaner/
dust extractor while using the tool to minimize
the amount of saw dust on and around the
workpiece. The dust extractor or vacuum
cleaner must be suitable for the type of dust
that will be created by sawing the workpiece.
WARNING
lower guard or cutting operation.
16
Never allow a vacuum
hose to interfere with the
Fig. 6
0° Cuts
Foot
Fig. 7
Vacuum Adapter
Dust Exhaust Port
45° Cuts