ENGLISH
The Klein Tools CL1300 is an auto-ranging clamp meter. It measures
AC / DC voltage, AC / DC current, resistance, capacitance, frequency, duty
cycle, and temperature. It can also test non-contact voltage, diodes, and
continuity.
•
Operating Altitude:
•
Humidity:
80% max
•
Operating Temperature:
•
Storage Temperature:
•
Accuracy Temperature:
•
Temperature Coeffi cient:
•
Dimensions:
•
11.9oz.
Weight:
•
Calibration:
•
CAT Rating:
•
± (% of reading + # of least signifi cant digits)
Accuracy:
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring
a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fi ngers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes
are connected.
• Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
~
AC Alternating Current
DC Direct Current
DC/AC Voltage or Current
Ground
AC Source
CL1300
Instruction Manual
GENERAL SPECIFICATIONS
2000 meters
0°C / 32°F to 45°C / 113°F
0°C / 32°F to 60°C / 140°F
18°C / 64°F to 28°C / 82°F
0.1*(specifi ed accuracy) / °C
7.65" x 2.56" x 1.375"
Accurate for one year
CAT IV 600V
WARNINGS
SYMBOLS
Warning or Caution
Dangerous levels
Double Insulated Class II
Safe for disconnect
from live conductors