Virutex RA17VG Manual De Instrucciones página 8

otros residuos domésticos.
Conforme a la Directiva Europea 2002/96/CE los usuarios
pueden contactar con el establecimiento donde adquirie-
ron el producto, o con las autoridades locales pertinentes,
para informarse sobre cómo y dónde pueden llevarlo
para que sea sometido a un reciclaje ecológico y seguro.
VIRUTEX se reserva el derecho de modificar sus productos
sin previo aviso.
E N G L I S H
RA17VG GROOVING MACHINE
1. SAFETY INSTRUCTIONS FOR
USE OF THE GROOVING MACHINE
Read carefully the GENERAL SAFETY INS-
TRUCTIONS LEAFLET, which is included
in the machine documentation.
1. Before starting up the machine make sure that the
supply voltage is the same as that shown on the spe-
cification plate.
2. Always keep hands clear of the cutting area, and
always hold the machine using the grips.
3. Always use original VIRUTEX tools. Never use damaged
tools or tools in poor condition.
4. It's advisable to work with dust collection in order to
avoid the bit's break.
2. TECHNICAL CHARACTERISTICS
Imput Power...............................................................1000 W
Motor.........................................................................50/60 Hz
No load speed..............................................14000-30000/min
Chuck collet......................................................................Ø 6 mm
Weight............................................................................1.95 kg
Weighted equivalent continuous
acoustic pressure level A.......................................86 dBA
Acoustic power level A...............................................97 dBA
Uncertainty..............................................................K = 3 dbA
Wear ear protection!
Vibration total values.......................................a
Uncertainty..........................................................K: 1.5 m/s
8
3. STANDARD EQUIPMENT
Contained in the transportation case you will find the
following elements (Fig. 1):
1.- Grooving machine RA17VG with carbide bit shar-
pened at both ends.
2.- 90° guide.
3.- Straight guide.
4.- Reversible angle.
5.- Depth gauge.
6.- Size 11 mm key for motor shaft
7.- Size 19 mm key for securing clamp.
8.- Size 3 mm Allen key.
9.- Dust collection pipe
10.- Cable – dust collection tube brackets
11.- Instruction manual
4. GENERAL DESCRIPTION
OF THE RA17VG MILLING MACHINE
The main function of the machine is to make grooves
and windows in doors for inserting isolation seals.
The machine is equipped with 2 kinds of guide and a
reversible angle that enable the making of grooves in
various positions as explained in the following sections
of this manual. It also has a centering pivot which faci-
litates the entry of the bit at the start of the operation.
The power cable can be fed through the brackets on
the dust collection tube to make the machine easier
to handle (Fig. 14).
The electronic control enables you to work at the ideal
speed for each type of job and bit. Adjust the speed
using button Q (Fig. 16).
The soft start function allows the machine to start
-1
progressively without to loose power.
5. TYPES OF MILLING
The grooves can be made in the moveable parts of
doors and windows as well as in the frames, which is
recommended for its simplicity. To control the gradual,
centered entry of the miller in the wood the machine
has a centering attachment F which is activated using
button E, (Fig. 6).
: <2.5 m/s
2
To begin a groove button E is pressed to the bottom,
h
2
and the machine is placed over the piece to be grooved,
The machine is equipped with a suc-
tion nozzle WHICH IS OBLIGATORY TO
CONNECT through the STANDARD DUST
COLLECTION ATTACHMENT No. 9 (Fig. 1)
to our AS182K, AS282K dust collectors
or any industrial equivalent. Not con-
nectig the machine to a dust collector
can cause a breakdown of it as well as
an inefficient job.