OHAUS Scout Pro Manual De Instrucciones página 23

All manuals and user guides at all-guides.com
SCOUT PRO
Establishing a New Reference Weight
Press and hold until % on the display reappears, then release.
PRINT
Unit
Repeat above procedure for new a reference weight.
Exiting Percent Weighing
Press and hold until desired unit is displayed.
PRINT
Unit
Display-Hold
Display-Hold is enabled only when Hold is turned ON in the Mode submenu in the
.S.E.T.U.P. menu. Display-Hold mode captures and stores the highest stable value.
When displayed, the stable icon will blink. NOTE: Units cannot be changed when in
Display-Hold mode.
Place item(s) on platform.
1
PRINT
Unit
EN-19