OHAUS Scout Pro Manual De Instrucciones página 29

All manuals and user guides at all-guides.com
SCOUT PRO
Error Codes List
When internal and some external problems occur with the balance, the internal software
will display messages as error codes. Explanations are given for possible problems.
Try remedies in order indicated.
Error Codes
Err 1 chEct Invalid checksum data
a) Cycle balance ON/OFF,
b) Return balance for servicing.
Err 2 LoAd Overload (>cap+90d) or Underload
a) Remove load,
b) Check shipping lock,
c) Recalibrate.
Err 4 WEIght Incorrect calibration weight
a) Use correct calibration weights,
b) Check environmental conditions.
Err 5 999999 Displayed value >99999
a) Exit application,
b) Rezero balance.
Err 6 count Parts counting error - balance exits parts counting
a) Exit application,
b) Rezero balance.
Err 8 FULL RS232 buffer is full
a) Cycle ON/OFF,
b) Check RS-232 settings in balance and computer.
Err 9 dAtA Internal data error. The next button press or a 5 second time-out
causes the balance to turn off
a) Cycle ON/OFF,
b) Return balance for servicing.
EN-25