Bosch MUM58234 Instrucciones De Uso página 19

W Caution!
We recommend that the appliance is never switched on for longer
than is necessary to process the ingredients. Do not operate
at no­load.
W Important!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period (X "Cleaning and
servicing" see page 24).
W Explanation of the symbols on the appliance or accessory
i
Follow the instructions in the operating instructions.
Y
Caution! Rotating blades.
W
Caution! Rotating tools.
Do not place fingers in the feed tube.
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our web page.
Contents
Intended use . ............................................17
Important safety information .....................17
Safety systems .........................................19
Overview...................................................20
Operating positions...................................20
Operation . .................................................21
Cleaning and servicing .............................24
Storage .....................................................25
Troubleshooting . .......................................25
Application examples................................26
Disposal . ...................................................27
Guarantee.................................................27
Optional accessories ................................28
Important safety information
Safety systems
Start lock-out
See "Operating positions" table.
The appliance can be switched on in
pos. 1 and 3 only:
■ when the bowl (11) has been inserted and
turned until it locks into place.
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power
is restored. To switch the appliance on
again, turn the rotary switch to P, then
switch on.
Overload protection
If the motor switches itself off while the
appliance is being used, the overload
protection feature has been activated.
A possible cause may be that too much
food was processed at one time.
If a safety system is activated, see
"Troubleshooting".
The appliance requires no maintenance.
en
19