operAtion - general
The appliance is intended only for domestic use, not
for professional use.
1. Cover
2. Spout
3. Base station
4. Quick serve button
5. Housing
6. Om/Off switch
7. Indicator light
operAtion - Before use for the first time
When using the jug kettle for the first time boil three jugs of water, and dispose of the boiled water.
operAtion - Boiling water
1. Place the machine on a flat surface.
2. Turn the lid counterclockwise to open the kettle (1). Fill the jug with the required quantity of water (at least
0.5 litres).
•
Never fill the water boiler over the "MAX". Otherwise the hot water can spatter out of the base.
3. Close the lid (1).
4. Place the jug on the base (3), and insert the plug in the wall socket. Push down the On/Off switch (6) at
the base of the jug. The On/Off indicator light (6) in the switch will illuminate..
5. The kettle switches off automatically when the water has boiled. Now disconnect the kettle from the main
power supply. Always keep the lid closed when you pour out the boiled water. Just press the button (4).
6. The thermo kettle keeps the water warm for up to 7 hours.
operAtion - overheating safeguard
The jug kettle is fitted with an overheating safeguard. This will switch off the jug kettle if it is operated without
(sufficient) water. Allow the jug kettle to cool down for at least 10 minutes before using it again.
cleAning And MAintenAnce
•
Remove the plug from the wall socket, and allow the appliance to cool.
•
Clean the device with a damp cloth. Never immerse the appliance in water. Never put the appliance in a
dishwasher. Make sure that the electrical connections do not become damp.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
•
Before cleaning, make sure that the appliance is not connected to the power supply and that it has
cooled down.
1
2
3
16
instruction manual
4
5
6
7