Systembuild Evolution 1694015COM Instrucciones De Montaje página 21

STEP 13
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
5
AND MUST BE INSTALLED PROPERLY.
Carefully turn your unit on its front side.
Attached the back panel as shown nailing straight into the raw edges.
(x48)
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
J
raw
surface
B
Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
21
5
E
You
Tube