Arrow ET50R.E.D. Manual De Instrucciones página 3

1 Hold tool by insulated gripping surfaces when performing an operation where the nailing tool may contact hidden wiring or its own cord. Contact with a "live" wire will also make exposed metal parts of the tool
"live" and shock the operator.
2 Know your power tool. Read operator's manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or
serious injury.
3 Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury.
4 Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
5 Protect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury.
6 Do not abuse cord. Never carry tool by cord. Never yank cord to disconnect it from receptacle. Keep cord away from heat, oil & sharp edges.
7 Do not attempt to alter the tool. Your ET50R.E.D.™ has a tested cycling time. It is designed to perform adequately at this rate. Any unauthorized alteration and/or use of unauthorized replacement parts is misuse which
could result in a hazardous condition causing possible serious personal injury. Unauthorized parts and/or tool modification automatically voids warranty.
8 Use only original ARROW parts.
®
SPECIFIC SAFETY RULES
BACK TO
INDEX
3