Publicidad
Idiomas disponibles
Idiomas disponibles
USE
The control panel is equipped with touch-screen operation. You do not need to press any buttons - the
appliance will respond to touch. Make sure that the control panel is always clean. Each time it is touched,
the appliance will respond with a signal.
CONNECTING
When you place the plug in the outlet, you will hear a signal. On the display 4 dashes [----] are flashing and
the indicator light of the power button is also flashing. Meaning that the hob has gone into standby mode.
USE
1.
When operating the device, please put on a pan/pot firstly. Note: Always place the pot or pan in the
centre of the hotplate.
2.
Keep the on/off button pressed to turn the the hob on. You hear a signal and 4 dashes [----] appear
on the display. The indicator light of the on/off button lights up.
3.
Press the button for the desired cooking zone. The indicator light for the selected cooking zone
lights up and 2 dashes [--] appear on the display.
4.
Now select the desired power with the slider. You can choose from 7 different settings, of which P7 is
the hottest and P1 the coldest. The selected setting is shown on the display.
Display
P1
Power
300 W
5.
Press the on/off button again to turn off the appliance. The ventilation stays on for a while to cool
down.
The power on the display is always that of the selected zone. The indicator light next to the button for the
cooking zone lights up for the selected zone. If you want to increase or decrease the power of a cooking
zone, you have to check which zone is selected. To change zones, press the cooking zone button.
! Attention: the appliance will sound several times if the correct pot is not on the hob and will then
automatically switch off after one minute. The display shows the error message [E0].
www.domo-elektro.be
P2
P3
600 W
1000 W
2
1
P4
P5
1300 W
1500 W
3
P6
P7
1800 W
2000 W
4
DO333IP
27
Publicidad
