Descargar Imprimir esta página

Domo DO333IP Manual De Instrucciones página 28

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
TEMPERATURE
Instead of displaying in power setting, you can also choose to display in temperature expressed in °C.
1.
Before turning on the appliance, you must first place a pot or pan on the cooking surface. Attention:
always place the pot or pan in the middle of the hob.
2.
Press and hold the on/off button to turn the hob on. You hear a signal and 4 dashes [----] appear on
the display. The indicator light of the on/off button lights up.
3.
Press the button for the desired cooking zone. The indicator light for the selected cooking zone
lights up and 2 dashes [--] appear on the display.
4.
Press the function button to switch to temperature display. The default setting of 210°C is switched
on and the temperature indicator light is illuminated.
5.
You can adjust the setting with the slide control. You can choose from 7 different settings. The
selected setting is shown on the display.
Display
Temperature
6.
Press the on/off button again to turn off the appliance. The ventilation stays on for a while to cool
down.
TIMER
You can set a timer on both cooking zones. When the timer is ready, the cooking zone to which the timer
is set automatically switches off.
1.
First press the button for the cooking zone on which you want to activate the timer.
2.
Press the timer button to set the timer. The timer indicator light illuminates. On the display, the
default setting flashes 30 minutes [00:30].
3.
You can set the desired time using the slide control between 1 minute [00:01] and 3 hours [03:00].
It is not necessary to confirm the desired setting. If you don't enter any more settings for a few
seconds, the timer is set. The time on the display no longer flashes.
4.
When the desired time is set, the timer will appear on the display alternating with the selected
temperature setting. The timer indicator is illuminated to indicate that the timer is set.
5.
If you want to turn off the timer, press and hold the timer button for a few seconds. Make sure you
have selected the correct zone.
28
DO333IP
60
80
60°C
90°C
2
1
1
120
150
120°C
150°C
3
2
180
210
180°C
210°C
4
3
240
240°C
5

Publicidad

loading