Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Specifications
Dimensions: ................................ 700 x 190 x 250 mm
Weight: ...................................... 5,5 kg
Tank volume: .............................. 6,5 l.
Piston volume: ............................ 45 ml
Outlet connection: ...................... R 1/2"
Testing fluid: ............................... Water, oil
Maximum temperature: .............. 50º C - 120ºF
Maximum pressure: .................... 50 bar. 725 psi. 5 Mpa.
2.
Pump parts
1.
Pressure hose
2.
V1: Shut-off valve.
3.
V2: Purge valve
4.
Locking hook
5.
Handle
6.
Tank
3.
General information
Dear customer, congratulations for purchasing a SUPER-EGO product. The testing pump TP40-S has been
developed and designed to meet the highest quality standards guaranteeing most stringent operation
requirements.
A number of unique design features make the pump different from other testing pumps:
1. Double shut-off and purge valve system, to ease test pressure adjustment.
2. Combined ball head and biblock brass shut-off valve system in order to reduce repair costs.
3. Distortion proof wear resistant polyamide piston.
4. ABS tank with reinforced base, high knock resistance and total corrosion resistance.
5. Pressure gauges with readily available calibration certificates.
At present, a great number of installations for fluid-carrying pipes can be found depending on the type
and nature of the pipe materials. These can be of metal: steel, stainless steel, galvanised steel, aluminium,
copper..., plastic materials: PP, PE, PB, PVC, PE-X..., as well as composite materials such as Multi-layer. All
these types of pipes can be joined as a function of the material and the nature of the joint by means of
welding, threads, mechanical joints with bushings, using adhesives ...
No matter the nature of the joint, the type of material and the fluid to be carried, any installation must be
liquid-tight, tests being required.
Testing pump TP40-S is a precision tool for testing installation tightness using water or oil as testing liquid, a
maximum testing pressure of 50 bar being possible.
4.
General safety
Prior to starting the testing pump, please carefully read and follow these instructions:
1. The position and operation of the controls must be studied prior to TP40-S pump operation
2. The TP40-S has been designed for specific applications. We strongly recommend that it SHOULD NOT
BE MODIFIED, nor used for other purposes.
3. Using only the liquids specified for the tests is utterly important for the integrity and durability of
the liquid-tight systems. NO acids or other corrosive liquids may be used for the tests. Use only clean
water or Oil as an alternate.
4. Check the pump for damaged or defective parts prior to pump operation. The pump MAY NOT BE
USED if pressure hoses or any other parts are flawed or broken.
5. Only original SUPER-EGO parts may be used for maintenance
6
ENGLISH
Publicidad
