Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower may only be used for bathing, hygiene
and body cleaning purposes.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• The product is not designed to be used with steam
baths!
Technical Data
Operating pressure:
Recommended operating pressure:
Fault
Head shower extremely leaky
4
English
max. 1 MPa
0,15 - 0,4 MPa
Cause
- Head shower soiled / scaled
Assembly (see page 33)
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 35)
i
Installation example (see page 36)
Flow diagram (see page 36)
Spare parts (see page 46)
Cleaning (see page 42)
Remedy
- Clean / descale head shower
(see page 42)
(1 MPa = 10 bar = 147 PSI)
max. 60°C
70°C / 4 min
Publicidad
