Publicidad
Idiomas disponibles
Idiomas disponibles
4. Door Triangle Bracket Assembly
a) Loosen but do not remove four 5/32-in. x
10-mm truss head screws with locking
washer (BB) mount the Left Side Panel (I)
and Bottom Panel (L), two screws on cart
Right Side Panel (H) and two on the Bottom
Panel (L). Align the holes of the triangle
bracket (O) with screws on Left Side Panel
(I) and Bottom Panel (L). Then tighten the
screws as shown in Fig. 4.
b) Repeat the steps a) for attaching the
triangle bracket (N) to the Right Panel (H)
and bottom Panel (L)
5. Back Panel, middle Assembly
a). Use four 1/4-in. x 15-mm truss head screws
with locking washer (AA) to connect back
panel, middle (F) to the right and left side
panels (H / I )as shown in Fig. 5
6. Diagonal Bar Barrier Assembly
Use two 5/32-in. x 10-mm truss head screws with
locking washer (BB) to attach Diagonal Bar Barrier (K)
to the bottom panel (L) and upside of the Back panel,
bottom (G). As shown in Fig. 6.
I
O
L
Fig. 5
I
Fig. 6
G
K
L
14
Assembly Instructions
Fig. 4
N
F
H
4 x AA
H
2 x BB
Publicidad
