Publicidad
Idiomas disponibles
Idiomas disponibles
Natural Gas Conversion for Model# 720/730-0830PM
Rear Burner Conversion
Tools required:
Steps：
1.
Remove the two screws securing the rotisserie heat shield from inside the firebox. Remove three securing
screws and drop off the Rear Baffle from the back of the grill.
2.
Remove the (Liquid Propane) orifice with 6mm wrench.
3.
Replace with 1.84MM NG orifice with 6mm wrench. Then put rear baffle and screw back into the original
position.
Phillips Head Screwdriver (+)
6mm Wrench
39
Publicidad
