Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Paper Shredder
Operating Instructions
Installation
Operation
Maintenance
Troubleshooting
Warning
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
Mount the shredder securely to the rim of the waste basket (FIGURE 1).
A socket-outlet should be near the equipment and be easily accessible. Connect the
power cord to any standard 220-240 volt AC outlet.
This model includes a built-in safety interlock mechanism, which requires the shredder to be
correctly mounted on to the included wastebasket. Located on the back center of the shredder,
next to the power cord, there is a curved flap-like shape that must FIT OVER THE OUTSIDE matching
ridge of the wastebasket (FIGURE1). THE SHREDDER WILL NOT OPERATE UNLESS IT IS PROPERLY
MOUNTED AS PICTURED!
It is not designed to operate with any other wastebaskets. An activation switch located on the
head unit automatically shuts off the shredder when it is lifted or removed. The supplied
Sheet Capacity
Paper Shred Size
Shreds paper into 5.6 x 55 mm pieces Shreds
CDs into 4 pieces at 35 mm wide
Paper Entry Width
220 mm
Credit Card / CD
Only one per pass
Capacity
Duty Cycle
5 min. on / 30 min. off
Voltage
11 sheets of 80 gsm paper*
12 sheets of 70 gsm paper*
220-240V/50-60Hz 1.2A
3
ENGLISH
Publicidad
