Descargar Imprimir esta página

Kohler K-45903 Instrucciones De Montaje página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

Before You Begin (cont.)
IMPORTANT! If the supplied toggle anchor fasteners are not used
to install the shower column:
Ensure that adequate strength wall backing materials and stud
bracing are properly positioned behind the finished wall.
Obtain proper fasteners (not provided) taking into account the
type of stud bracing material and thickness of the mounting
collar, finished wall, wall backing, and stud bracing.
Fasteners must be corrosion-resistant and capable of 300 lbs (136
kg) load bearing per fastener.
A minimum of two fasteners are required per mounting collar.
Fasteners must be securely anchored into the stud bracing to
adequately support the product.
IMPORTANT! For retrofit/remodel installations: Check the existing
shower enclosure for adequate clearances before proceeding with the
shower column installation. Refer to the Roughing-in for the shower
column.
Verify the distances between:
• The center of the existing shower arm and the center of the
mixing valve trim.
Kohler Co.
3
1188076-2-B

Publicidad

loading

Este manual también es adecuado para:

K-45904