Tanita BC-541N Manual De Instrucciones página 8

PROGRAMMING THE GUEST MODE
Guest mode allows you to program the unit for a one-time use without reading a personal data
number.
Press the Guest button to activate the unit. Then follow the steps: Set Age, Select Female or Male,
and Specify Height.
Step onto the scale after "0.0" is shown on the display. Your weight will be shown first, continue
standing on the scale until the body fat % reading is shown on the display. The reading will be shown
for 40 seconds.
Note: Do not step off until Body fat % in shown.
Note: If you step onto the scale before "0.0" appears the display will show "Error" and you will not
obtain readings.
TAKING WEIGHT MEASUREMENT ONLY
Press the Weight-only button. After 2 or 3 seconds, "0.0" will appear on the display and the unit will
beep. When "0.0" appears on the display, step onto the scale. The body weight value will appear.
The display will light for about 20 seconds, and then the power will automatically turn off.
6