HYGIPLAS F314 Manual De Instrucciones página 2

F314_ML_90x130mm_v2_20230413.indb 2 F314_ML_90x130mm_v2_20230413.indb 2
EN
Safety Instructions
• Clean the probe immediately after each measurement to avoid cross
contamination.
• Do not expose the appliance to temperatures over 50ºC/122ºF or use in ovens.
• The accuracy of this device has been tested as part of the manufacturing quality
control process.
Technical Specification
Temperature Range
Display Accuracy
Display Reading Update
Safety Zone Range
Battery
Product Dimensions
Installation
1. Open the battery compartment cover and insert the battery correctly. Then close
the cover.
2. Mount the thermometer as instructed below.
Thermometer It is intended to detect the room temperature or temperature of
a place where it is located. A convenient position would be the
outside wall of a refrigerator/freezer.
• Clean the surface area where the unit is to be mounted.
• Attach the velcro pads to the mounting surface and to the back
of the appliance. Then join together.
Probe sensor It is intended to detect the internal temperature of a refrigerator/
freezer. Hence, place it well inside.
• Clean the inside wall where the sensor is to be mounted.
• Press the suction cup firmly onto the wall to fix the sensor well.
Operation
• Slide the mode switch to "Freezer" or "Refrigerator" as needed.
• The left screen displays the room temperature while the right screen displays the
internal temperature of the refrigerator/freezer.
Select temperature unit
• Press the "°C/°F" button to select the desired temperature unit.
2
-40°C ~ 70°C (-40°F ~ 158°F)
• ±1°C/±1.8°F for the range of -20°C ~ 70°C
• ±2°C for other ranges
10 seconds
• Refrigerator: 2°C ~ 8°C (35.6°F ~ 46.4°F)
• Freezer: -9.5°C ~ -23°C (+14.9°F ~ -9.4°F)
1 x 1.5V, AAA
26 (H) x 135 (W) x 17.3 (D) mm
2023/4/13 16:18 2023/4/13 16:18