KitchenAid KFP1466 Instrucciones página 10

CMD + SHIFT CLICK TO CHANGE COPY ASSEMBLING THE FOOD PROCESSOR
Attaching the wor_k bowl cover_
NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
Place the work bowl cover on the work
1
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
Installing the dicing kit
Place the dicing kit base inside the
1
work bowl.
Place the work bowl cover on the work
3
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
10
Fit the food pusher into the 2-in-1
2
feed tube. See "Using the 2-in-1 feed
tube" for details on working with
different sized foods.
Insert the dicing blade into the dicing
2
kit base.
After dicing, remove the work bowl
4
cover and dicing blade, then insert the
dicing kit clean out tool into the dicing
kit base, and fold down to push any
extra food through the grid.