Publicidad
Hose
Hose Latch Tab
Languette de
blocage du tuyau
Pestaña de sujeción
de la manguera
Caddy
Attachments
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Notch
Fente
Ranura
Dusting Brush
Brosse à
épousseter
Cepillo para
sacudir
- 14 -
➢ Tilt the canister back.
➢ Align the hose latch tab and notch
in canister and insert hose into
canister until it snaps in place.
NOTE: The vacuum cleaner will not
start unless hose is fully inserted and
snapped in place.
To remove:
➢ Press hose latch tab inward and
pull out on hose.
➢ Align the tab on the wand with the
slot in the caddy.
➢ Press the caddy onto the wand and
snap the caddy into place
➢ Install the crevice tool and dusting
brush into the caddy as shown.
Publicidad
