Publicidad
Pre-Filter
Pre-Filter
Préfiltre
Pre-filtro
2
1
- 32 -
TO REPLACE DUST CUP
➢ Place dust cup back into vacuum
cleaner by ➀ inserting the bottom
first and ➁ tilting back with the dust
cup handle raised.
➢ Lower the dust cup handle to lock
dust cup in place. A noticeable
"click" should be heard.
The pre-filter is located inside the dust
cup. Check the pre-filter frequently
and clean when dirty.
➢ Remove the dust cup. (see DUST
CUP, p. 30).
➢ Make sure the dust cup is empty.
➢ Rotate dust cup lid assembly
counterclockwise as indicated on
the lid and lift off.
➢ Grasp pre-filter and rotate
counterclockwise to remove.
➢ Clean pre-filter by gently tapping
over a trash container. Tap on
several sides to ensure best
cleaning.
➢ If necessary, rinse with cold water
only, DO NOT use detergent or
soap. Allow parts to dry 24 hours
before putting back into vacuum
cleaner.
➢ DO NOT wash in the dishwasher.
DO NOT install damp.
Publicidad
