Publicidad
Replacing Headlight Bulb
Brush Servicing
New Brushes
Nouvelles brosses
Cepillos Nuevos
Base Support Bars
Barres de support de la base
Barra de soporte de la base
Worn Brushes
Brosses usées
Cepillos desgastado
➢ Remove POWER NOZZLE cover.
➢ Remove the light bulb by pulling
straight out.
➢ To replace the light bulb, carefully
insert fully into slot.
➢ Only use a bulb rated 13V AC- 9
Watts.
➢ Replace POWER NOZZLE cover.
TO CHECK BRUSHES:
➢ When brushes are worn to the
level of the base support bar,
replace the agitator. (see WHAT
TO DO WHEN SERVICE IS
NEEDED, p. 60)
➢ To replace agitator assembly see
BELT CHANGING, p. 40.
- 46 -
Publicidad
