Oasis DELUXE 504819C Manual De Instrucciones página 6

3. Setting the hot water temperature
F
4. Setting the cold water temperature
F
5. Turning on the heating and cooling system
Now that the temperatures are set, the heating and cooling systems need to be energized.
F
* To turn off the water heating systems press the HOT/- button again. The cup and four bars will go out.
This can be done at any time.
F
* To turn off the water cooling systems press the COLD/+ button again. The waterglass/snowflake and four bars will go
out. This can be done at any time.
NOTE:
The temperatures displayed during normal operation are actual temperatures of the hot and cold water.
6
All manuals and user guides at all-guides.com
A. Press the HOT/- button. The temperature will begin to blink.
F
B. Use the HOT/- and COLD/+ buttons to set the desired
water temperature.
C. Press the SET button, and move on to setting the cold
water temperature.
After setting the hot water temperature and pressing the SET
F
button, the cold water temperature will blink.
A. Use the HOT/- and COLD/+ buttons to set the desired cold
water temperature.
B. Press the SET button again. The temperatures are now set.
A. Turning on the water heating system
F
Press the HOT/- button. The coffee cup icon and four red
bars will blink.
The blinking cup and four bars mean that the water is
being heated.
If the cup and bars are on but not blinking, then the water has
reached the set point and the heater is off.
B. Turning on the water cooling system
F
Press the COLD/+ button. The water glass/snowflake icon and four
blue bars will blink.
The blinking waterglass/snowflake and four bars mean that the
compressor is running.
If the waterglass/snowflake and bars are not blinking, then the
water has reached the set point and the compressor is off.
oasiscoolers.com