Bartscher 700133 Manual Del Usuario página 45

6. Cleaning
WARNING!
Before cleaning disconnect the device from the power
supply (pull the plug!).
Do not use pressurized water jest for cleaning!
Protect the device from the water penetration.
CAUTION!
Do not use any aggressive and abrasive cleaning agents or solvents.
o Clean the device before restarting it.
o Clean the device regularly during operation. Pay attention to the following instructions
for cleaning the individual elements.
Device interior
o Clean the device interior with warm water, using gentle washing agent and soft
cloth. Then dry the cleaned surfaces thoroughly using a soft cloth.
Door seal
o In order to assure correct operation of the device make sure that the door seal is clean.
Housing
o Clean the device exterior with soft cloth, soaked in warm water and gentle cleaning
agent. Then dry the device thoroughly with soft cloth.
Exhaust hole/fan
o The cooling efficiency may be reduced due to accumulation of dust or other
contaminants blocking the exhaust holes. If necessary, clean the exhaust holes with
the vacuum cleaner.
- 41 -