Powersmart PSM2020 Manual De Instrucciones página 10

ATTACH THE FRONT WHEEL ASSEMBLY
The front wheel assembly attaches to the front of the deck. To attach the front wheel to the deck, perform
the following steps:
1. Mount the single wheel to the wheel bar with the mounting screw.
2. Attach front wheel and bar assembly to the deck with four M6 screws,
four washers and four M6 nuts.
ATTACH LOWER & UPPER HANDLE
1. Take lower handle and line up the hole in the lower handle with the
hole on the handle bracket.
2. Secure the lower handle with handle bracket with provided M8 screw
(2) and M8 nut (2) on each side.
3. Pull upper handle up and lock it in position with quick handle lock
lever on both side.
4. Insert the recoil starter handle cable into the hook provided on the
upper handle.
M6 Screw
M8 Screw
M8 Nut
Quick handle lock lever
10