Descargar Imprimir esta página

Powersmart PSM2020 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

ADJUSTING THE CUTTING HEIGHT
Warning! Cutting height adjustments should only be performed after the engine and blades
have come to a complete stop!
It is always best to begin cutting your lawn with a higher deck height to prevent scalping your lawn.
Rear wheel
The cutting height for the rear wheels is adjusted with a single lever.
Actuate the adjustment lever and pull it to the required position.
Please make sure that the lever locks into position.
Front wheel
The single front wheel must be adjusted to the same cutting height as the
rear wheels to ensure and even cut. Remove the axle bolt and adjust to the
desired height.
OPERATION
GAS AND OIL FILL-UP
The engine comes shipped without oil or gasoline. Be sure to add oil and gasoline before starting the
engine.
1. Add oil before starting mower for the first time.
2. Service the engine with gasoline as instructed.
Warning: Use extreme care when handling gasoline. Gasoline is extremely flammable and
its vapors are explosive. Never fuel the machine indoors or while the engine is hot or running.
Extinguish all cigarettes, cigars, pipes and other potential sources of ignition.
ADD OIL
The engine is shipped without oil. User must add the proper amount of oil before operating the engine for
the first time .The oil capacity of the engine crankcase is 18fl.oz. For general use (above 40 °F),we
recommend 30W,4-stroke engine oil.
Cutting height adjustment lever
12

Publicidad

loading