Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the Air Conditioner
Cleaning has to be carried out at regular
intervals to ensure the unit is at optimal
performance. A dirty unit may cause
malfunction and you may retrieve "H 99"
error code. Consult an authorised dealer.
• Before cleaning, switch off the power supply
and unplug the unit.
• Do not touch the aluminium fi n as the sharp
parts may cause injury.
• Do not use benzine, thinner or scouring
powder.
• Use soap ( pH 7) or neutral household
detergent only.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft
and dry cloth.
The coils and fans should be
cleaned periodically by an
authorised dealer.
Outdoor unit
Clean the debris that surround
the unit.
Clear any blockage from the
drain pipe.
Front panel
Wash gently and dry.
How to remove front panel
1 Raise up.
Close it securely
1 Hold horizontally.
3 Close down.
4 Press both ends and center of the front panel.
20
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damaging
the surface.
• Dry the fi lters thoroughly under a shade,
away from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter
Remove from the unit
A
B
2 Slide the front panel to
right
and pull out
A
2 Match and push in.
Indoor unit
( Structure of the unit may vary depending
on the model)
Aluminium fi n
Front panel
Air fi lters
Attach air fi lter
Insert into the unit
.
B
Publicidad
