Descargar Imprimir esta página

Domo DO933SBS Manual De Instrucciones página 53

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
· All repairs should be carried out by the manufacturer or its aftersales service.
· Never immerse the appliance, the cord or the plug in water or any other liquid.
· Make sure that children do not touch the cord or appliance.
· Keep the cord away from sharp edges and hot parts or other heat sources.
· Before use, remove all packaging materials and any promotional stickers.
· Keep the ventilation openings free of obstructions.
· Do not use any mechanical or other devices to speed up the defrosting process.
· Do not use any other electrical appliance inside the fridge, unless they are approved for
this purpose by the manufacturer.
· Do not keep any explosive substances inside the appliance, like for instance aerosol cans
with a flammable propellant.
· Make sure that the refrigerant circuit does not get damaged, for instance during
transportation or installation.
· Make sure that the plug does not get squashed or damaged by the back of the appliance. A
squashed or damaged power plug may overheat and cause fire.
· Make sure that you have access to the plug of the appliance.
· Do not pull the cord.
· If the socket is loose, do not plug in the appliance. (risk of electric shock or fire)
· This is a heavy appliance. Be careful when moving it.
· Do not touch anything that comes out of the freezer with damp or wet hands. This could
cause skin burns.
· Avoid long exposure to direct sunlight.
INSTALLATION
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth
and the inside with a wet, lukewarm cloth.
· Avoid placing the cabinet in a narrow recess or near any leave source, direct sunlight, or
moisture.
· Let air circulate freely around the cabinet. Keep the rear of the refrigerator 10 cm away
from the wall.
· Select a place with a strong, level floor.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly
on the evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated
on the rating label of your appliance corresponds to the voltage in your home. A different
voltage could damage the appliance.
www.domo-elektro.be
53
DO933SBS

Publicidad

loading