Port USB
In USB mode, the Bluetooth® Karaoke System can read from the USB drive the
following file types: MP3, WMA.
1. Power on the unit insert a USB Flash Drive (not included) into the USB port,
ensuring the plug is fully inserted in the correct way. The Bluetooth® speaker
will automatically play music from the USB.
2. Press play/pause button to pause or resume playback. When pausing, the
display shows ll.
3. Press shortly previous or next button to play the desired track. Or press and
hold previous or next button to fast-rewind or fast-forward and release the
button for playback.
You can also control playback from the remote control.
4. To exit the USB function, remove the USB flash drive or press MODE button
on the back panel or on the remote control.
TF/SD card
1. Insert a TF/SD card (not included) into the TF/SD card slot, ensuring the plug
is correctly inserted. The unit will automatically play music from the TF/SD
card.
2. Press play/pause button to pause or resume playback. When pausing, the
display shows ll.
3. Press shortly previous or next button to play the desired track. Or press and
hold previous or next button to fast-rewind or fast-forward and release the
button for playback.
You can also control playback from the remote control.
4. To exit the TF/SD mode, remove the TF/SD card or press MODE button on the
back panel or on the remote control.
Note: When USB and SD card inserted at the same time, the last one inserted
will be played in priority. To toggle from USB to SD card and vice versa, press
MODE button and select the USB or TF/SD mode.
AUX IN
1. Connect your audio device to the speaker system via an AUX IN cable (included).
2. You can also control playback with your audio player.
3. To stop the AUX-IN function, press MODE button.
Note: When the AUX IN function is activated, the PLAY/PAUSE, PREVIOUS and
NEXT buttons on the speaker are disabled. Please use the control buttons on your
music player to get the best control experience of the music.
K8250_02IM1288_101_V08.indb 23
23
10/7/18 3:05 pm