preparing to install the range
REMOVE PACKAGING
Remove packaging materials. Remove the supporter frame located on the back of the cooktop
glass. Failure to remove packaging materials could result in damage to the appliance.
PREPARE TOOLS & PARTS
The tools you will need
Drill
Phillips Screwdriver
What's included with your range
Template
Additional materials you may need
4-Wire Cord or 3-Wire Cord
(UL Approved 40 or 50 AMP)
Adjustable Wrench
Flat Screwdriver
Anti-Tip Bracket
English - 20
Pliers
Pencil
Screws (short:2 ea,
Filler Kit & Screws (3 ea)
long:2 ea)
Strain Relief
(For Conduit Installation Only)
/
˝ Nut Driver
1
4
Level