Publicidad
Idiomas disponibles
Idiomas disponibles
17026828_0207 SBE 610 NAFTA.book Seite 5 Dienstag, 24. April 2007 1:38 13
All manuals and user guides at all-guides.com
Operating Instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool
is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents
1 Specified Conditions of Use
2 General Safety Rules
3 Special Safety Rules
4 Overview
5 Special Product Features
6 Initial Operation
6.1 Assembly of the additional handle
7 Use
7.2 Switching On and Off
7.3 Rotational speed preselection
7.4 Switching over drilling/impact drilling
7.5 Selecting the direction of rotation
7.6 Switching pulse function on and off
(depending on equipment)
7.7 Tool change
keyless chuck Futuro Plus
7.8 Tool change
with a geared chuck
7.9 Removing chuck
8 Tips and Tricks
9 Maintenance
10 Accessories
11 Repairs
12 Environmental Protection
13 Technical Specifications
1 Specified Use
The machine is suitable for drilling, without impact,
in metal, wood, plastic and similar materials and
for impact drilling in concrete. stone and similar
materials. Furthermore, the machine is suitable for
thread tapping and screwdriving.
With the SBE 610 Impuls, only hole saws with a
diameter of up to 68 mm can be used.
The machine is not suitable for inserting and
removing screws in metal materials.
The user bears sole responsibility for damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.
2 General Safety Instructions
WARNING! Read all instructions. Failure to follow
all instructions listed below may result in electric
shock, fire and/or serious injury. The term „power
tool" in all of the warnings listed below refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres,such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
ENGLISH
ENG
5
Publicidad
