Publicidad
Idiomas disponibles
Idiomas disponibles
17026828_0207 SBE 610 NAFTA.book Seite 9 Dienstag, 24. April 2007 1:38 13
All manuals and user guides at all-guides.com
9 Maintenance
Keyless chuck cleaning:
After prolonged use hold the chuck vertically, with
the opening facing down, and fully open and close
it several times. The dust collected falls from the
opening. Regular use of cleaning spray on the jaws
and jaw openings is recommended.
f
10 Accessories
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
See page 4.
A Angle drilling and screwdriving attachment
B Flexible shaft
C Drill stand
D Machine vice
E Scaffolding hook with integrated bit depot:
Clip into the scaffolding hook fastening (6)
and turn to engage in one of the 4 positions.
F Steel wire end brush
G Steel wire cup brush
H Steel wire rotary brush
I Bit clamping bush
For complete range of accessories, see
www.metabo.com or the main catalogue.
11 Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
The connection cable must only be replaced by
Metabo or an authorised customer service work-
shop.
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.
12 Environmental Protection
Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
13 Technical Specifications
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
P
=
Nominal power input
1
P2
=
Power output
n
=
No load speed
0
n
=
Speed at rated load
1
dia. max=
Max. solid drill diameter
s max =
Max. impact rate
b
=
Chuck capacity
G
=
Spindle thread
H
=
Drill spindle with hexagon socket
m
=
Weight without mains cable
D
=
Collar diameter
During operation the noise level can exceed
85 dB(A).
Wear ear protectors!
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
9
Publicidad
