Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions for Floating Swivel Mount
Tools required: hex wrench (provided), Phillips screwdriver, stud finder, pencil, tape measure, power
32. Carefully move the assembled stand and position at the desired location against a wall. If
necessary, adjust the pre-attached floor levelers at the bottom of both Legs (D and E) to level
the unit. Now, follow the instructions printed on the plastic bag containing Tipping Restraint
Hardware Kit to mount the tip-over restraint to the Spine and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware
maybe required. Please contact your local hardware store for assistance. Young children can
be seriously injured by tipping furniture. You must install the Tipping Restraint Hardware with
the unit to prevent the unit from tipping, causing any accidents or damage. The tipping
restraints are intended only as a deterrent, they are not a substitute for proper adult
supervision. The tipping restraints are not earthquake restraints. If you wish to add the extra
security of earthquake restraints, they must be purchased and installed separately.
33. The stand is now ready for use. Swivel TV left-or-right for optimum viewing control.
drill and 1/8" drill Bit.
25
TV
Publicidad
