Publicidad
Idiomas disponibles
Idiomas disponibles
1
JL/JR
I
2
40. Attach the Monitor Brackets (JL/JR) to the back of the television following steps 22 and 23 or
24 and 25, depending on the type of TV that you own.
Ask for assistance to lift the television up to attach the Monitor Brackets onto the Mounting
41.
Frame (I). Set the hooks on Monitor Brackets over the Mounting Frame and then lower them
onto the bars of the Mounting Frame. Loosen the lock bolts that are pre-attached on the
Monitor Brackets to ensure an easy fit at the bottom hooks. Proceed to center the television.
42. When the TV is in its intended position, tighten both Lock Bolts with a long Phillips screwdriver
until they hit the underside of the Mounting Frame (I) to ensure your TV is safe and secure.
43. Place the assembled console under your TV. Finally, connect the A/V and power cables to your
TV. You are now ready to enjoy your wall-mounted Flat Panel TV.
Assembly Instructions
JL/JR
I
28
Publicidad
