First Steps; Removing From Packaging And Storing; Securing Your Personal Speakerphone; Charging The Battery - Beyerdynamic SPACE Instrucciones De Uso

First steps

FIRST STEPS

Removing from packaging and storing

► When not in use and for transport, store the beyerdy-
namic SPACE Personal Speakerphone and accessories
in the carrying case.
This provides the best protection and prevents damage.

Securing your Personal Speakerphone

The Personal Speakerphone has a 1/4" threaded hole in
the centre of its underside, which can be used to screw it
onto a tripod, for example.

Charging the battery

We recommend you use only the supplied USB cable to
charge the battery.
1 . Use the cable supplied to connect the beyerdynamic
SPACE Personal Speakerphone to any standard-com-
pliant live USB-C socket (e.g. USB power adapter) via
the USB-C port. If necessary, use a USB adapter (see
„Scope of delivery" on page 7).
2 . Remove the USB cable after charging.
Remarks on the life of Li-ion batteries
• When fully charged, disconnect the USB cable from the
charging unit and the beyerdynamic SPACE Personal
Speakerphone.
• CAUTION! High temperatures, especially with a high
charge level, can cause irreversible damage.
• If the battery is not used or is stored for extended
periods of time, it is recommended to charge it to
approx. 50 % and store it at no more than 20 °C.
• Switch off the battery-powered product after use.

Displaying the battery charge level

► Briefly press the
The charge level is displayed via the LED ring.
Using the product with a USB cable
connection
You can operate the beyerdynamic SPACE Personal
Speakerphone with a PC or laptop using a USB cable
connection.
1 . Switch on the laptop/PC.
2 . Connect the beyerdynamic SPACE Personal Speaker-
phone with the desired computer using the enclosed
USB cable and the USB port.
If necessary, use a USB adapter (USB-C to USB-A, see
„Scope of delivery" on page 7).
3 . If the speakerphone has not come on automatically,
switch it on with the on/off switch.
LED display of charge level:
Red*: Battery 0–25 % full
8/14
button once.
–
Yellow: Battery 25–62.5 % full
Green:
Battery 62.5–100 % full
*) The LED flashes when the charge level is close to zero
Using the product with Bluetooth®
connection
You can operate the beyerdynamic SPACE Personal
Speakerphone via Bluetooth® with a smartphone or PC.
For this, the Bluetooth®function must be active, and the
speakerphone must be paired with the output device.
You can find instructions on how to operate the product
under „Operation" on page 9.

SOFTWARE UPDATE

Firmware updates are carried out via USB-HID
using the beyerdynamic Update Hub. The soft-
ware for updating the product can be down-
loaded here:
https://byr.li/firmwareupdate
The device has a firmware update function
(DFU) via USB connection to a PC (Windows and
Mac OS).
During the update process, the LED ring flashes
magenta.
COMPATIBILITY WITH PLAYBACK
DEVICES
The beyerdynamic SPACE Personal Speakerphone is
compatible with Bluetooth® playback devices that
support the following profiles:
• A2DP (for audio transmission)
• HFP (for phone operation)
All associated functions are only available if they are
supported by the playback device.

SUPPORTED AUDIO CODECS

The beyerdynamic SPACE Personal Speakerphone
supports the audio codec SBC.
Please note that only the Codecs available in the play-
back device can be used for audio transmission.
The playback device and the beyerdynamic SPACE
Personal Speakerphone device automatically select the
best mutually available Codec: In this case SBC.
beyerdynamic SPACE Personal Speakerphone
–
–