Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may
see error code "H 99". Please consult authorised
dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Coils and fans should be
cleaned periodically by
authorised dealer.
Outdoor unit
Clean debris that surround the
unit.
Clear any blockage from the
drain pipe.
Front panel
Wash gently and dry.
Remove the front panel
2 Pull out and lift up.
1 Release the hooks at
both ends.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade,
away from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter
Close it securely
3 Close down.
4 Press both ends and center of the front panel.
Indoor unit
Aluminium fi n
Front panel
Air fi lters
Attach air fi lter
Insert into the unit
2 Push in.
1 Insert at
both sides.
31
Publicidad
