Descargar Imprimir esta página

Kenwood KMM-BT209 Guia De Inicio Rapido página 15

Ocultar thumbs Ver también para KMM-BT209:

Publicidad

Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery
Bluetooth®
• Depending on the Bluetooth version, operating system and the
firmware version of your mobile phone, Bluetooth features may not
work with this unit.
• Be sure to turn on the Bluetooth function of the device to make the
following operations.
• Signal conditions vary depending on the surroundings.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Pair and connect a Bluetooth device for the first time
1
Press B SRC to turn on the unit.
2
Search and select the name of your receiver ("KMM-BT358"/
"KMM-BT309"/"KMM-BT209") on the Bluetooth device.
"PAIRING"
KNOB" appears on the display.
• For some Bluetooth devices, you may need to enter the Personal
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established
automatically.
appears on the display window for 2 seconds.
"
the connected device.
Answer a call
Press
• To adjust the phone volume [00] to [35], turn the volume knob.
• To end a call, press
Audio player via Bluetooth
1
Press B SRC repeatedly to select BT AUDIO.
• Pressing
2
Operate the audio player via Bluetooth to start playback.
Secure using cord
To
clamps (not supplied)
if necessary.
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
"PASS XXXXXX"
"Device name"
Identification Number (PIN) code immediately after searching.
/
: "BT1 CONNECTED" and/or "BT2 CONNECTED"
" indicator lights up to show the strength of the battery and signal of
: "BT1" and/or "BT2" indicator on the display window lights up.
or the volume knob or one of the number buttons (1 to 6).
.
enters BT AUDIO directly.
On the faceplate
Press 6 IW.
Press 2
Press
Press and hold
Press 4
Press and hold 3
or [GROUP RANDOM].
"PRESS"
"VOLUME
/ 1
.
.
.
repeatedly.
to select [ALL RANDOM]
7

Publicidad

loading

Este manual también es adecuado para:

Kmm-bt309Kmm-bt358