Glacier bay 67190W-6104 Guía De Instalación Y Cuidado página 5

Installation (continued)
3
Preparing the pop-up assembly
□
Remove the pop up stopper (J) and drain
ange (K) from the drain body (N).
□
Screw the lock nut (M) all the way down, and
push the rubber washer (L) down.
L
M
N
4
J
K
5
Please contact 1-855-HD-GLACIER for further assistance.
Installing the drain body
□
Apply silicone sealant (not included) under the
drain ange (K) and place the drain ange (K)
into the drain hole of the sink.
□
From underneath the sink, screw the drain
body (N) onto the drain ange (K). Ensure that
the opening (1) for the ball rod on the drain
body (N) faces towards the rear of the sink.
□
Tighten the rubber washer (L) and lock nut (M)
on the drain body (N). Do not overtighten.
L
M
N
K
1
1
HOMEDEPOT.COM