AUDIO SETTINGS
FADER
R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE
L15 to R15 (0): Adjusts the left and right speaker output balance.
VOLUME OFFSET
For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Presets the
volume adjustment level of each source. (Before adjustment,
select the source you want to adjust.)
SOUND RECNSTR
ON: Creates realistic sound by compensating the high-frequency
(Sound reconstruction)
components and restoring the rise-time of the waveform that are
lost in audio data compression. ; OFF: Cancels.
SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if
[SUBWOOFER SET] is set to [ON]. ( 17)
18
DISPLAY SETTINGS
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [DISPLAY], then press the knob.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Repeat step
3
until the desired item is selected/activated or follow
the instructions stated on the selected item.
5
Press and hold
to exit.
To return to the previous setting item, press
COLOR SELECT
VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*: Selects your preferred
key and display illumination color.
You can create your own color (when [CUSTOM R/G/B] or preset colors* is
selected). The color you have created can be stored in [CUSTOM R/G/B].
1 Press and hold the volume knob to enter the detailed color adjustment.
2 Press S / T to select the color (R/ G/ B) to adjust.
3 Turn the volume knob to adjust the level (0 — 9), then press the knob.
DIMMER
ON: Dims the display and button illumination. ; OFF: Cancels.
BRIGHTNESS
0 — 31: Selects your preferred brightness level for display and button
illumination.
TEXT SCROLL
AUTO/ ONCE: Selects whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
* Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/
BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/
GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/ ORANGE2/
ORANGERED
.
Default: XX